Engine |
||
---|---|---|
Model | CUMMINS B4.5T | |
Rated power | 74kW | |
Rated speed | 2200r/min | |
Max. torque | 414N.m | |
Fuel consumption | ≤250/kW.h | |
Dimensions | ||
A Overall length | 7095mm | |
A'Overall length | 6950mm | |
B Transport height | 3500mm | |
C Width over tires | 2085mm | |
D Wheelbase | 2145mm | |
E Min. Ground clearance | 340mm | |
F Tread width(F/R) | 1720/1570mm | |
G Bucket width | 2085mm | |
J Height to bucket hinge pin | 3800mm | |
O Max. rollback | 42° | |
P Departure angle | 21° | |
Q Dump angle | 45° | |
Operating weight | 7400±50kg | |
Technical Parameters | ||
Max. traction | Two-wheel drive(2WS) | ≥40kN |
Four-wheel drive(4WS) | ≥55kN | |
Bucket capacity | Standard bucket | 0.9m3 |
6-in-1 bucket | 0.9m3 | |
Backhoe bucket | 0.3m3 | |
Travel speeds | FWD 1st gear | 5.8km/h |
FWD 2nd gear | 10.5km/h | |
FWD 3rd gear | 20km/h | |
FWD 4th gear | 40km/h | |
REV 1ST gear | 7km/h | |
REV 2nd gear | 12.5km/h | |
REV 3rd gear | 24km/h | |
REV 4th gear | 47km/h | |
Loading performance | Rated loading capacity | 1800kg |
Total cycle time | 8.2s | |
Max. Bucket breakout force | ≥42kN | |
Lifting capacity | ≥25kN | |
K Bucket dumping height | 2680mm | |
L Dumping reach | 620mm | |
Digging performance | Digging force | ≥45kN |
X Max. digging depth | 4300mm | |
Y Overall digging height | 5575mm | |
Z Overall reach | 5480mm | |
Y'Max. Loadover height | 3820mm | |
Max. Bucket rotation | 176° |
Pages
Saturday, October 17, 2015
XG765
Side Forklift Truck
Product Model |
Unit | CCCD3A | CCCD6 | ||
---|---|---|---|---|---|
Rated Lifting Capacity | kg | 3000 | 6000 | ||
Deadweight | kg | 5370 | 8800 | ||
Platform Height | mm | 970 | 1070 | ||
Minimum Turning Radius | mm | 4550 | 4900 | ||
Overall Dimensions:(LxBxH) | mm | 4240x2040x2710 | 4935x2280x2835 | ||
Travel Speed | km/h | 19 | 21 | ||
Gradeability | % | 15 | 20 | ||
Load Center Distance | mm | 500 | 600 | ||
Platform Inclining Angle | ° | 3°upward/downward | 3°upward/downward | ||
Fork Inclining Angle | ° | 5°upward/downward | 5°upward/downward | ||
Maximum Lifting Height | mm | 3500 | 3350 | ||
Fork Regulating Scope | mm | 290-1070 | 310-1200 | ||
Minimum Ground Clearance | mm | 170 | 150 | ||
Track (Front/Rear) | mm | 1600 | 1750 | ||
Wheelbase | mm | 2550 | 2800 | ||
Tyre | Front | 8.25-15-14PR | 9.00-16-14PR | ||
Rear | 8.25-15-14PR | 9.00-16-14PR | |||
Engine | Model | 490BPG | LR4108G8 | YC4108G | |
Rated Power/ Speed | kw/r • p • m | 37/2650 | 64/2400 | 58/2400 | |
Max. Torque/ Speed | N • w/r • p • m | 145/1800-2000 | 293/1500-1600 | 270/1400-1600 | |
Fuel Consumption Rate | g/kw.h | 238 | 242 | 235 | |
Unit |
XG S550 | XG S560 | |
---|---|---|---|
Rated Lifting Capacity | kg | 5000 | 6000 |
Lifting Height | mm | 3350 | 3350 |
Platform Inclining Angle (Upward/Downward) | ° | 3/3 | 3/3 |
Fork Inclining Angle (Upward/Downward) | ° | 5/5 | 5/5 |
Maximum Travel Speed | Km/h | 21 | 21 |
Fully-loaded Lifting Speed | mm/s | 270 | 270 |
Gradeability (full load) | % | 20 | 20 |
Minimum Ground Clearance | mm | 170 | 170 |
Minimum Turning Radius | mm | 5100 | 5100 |
Front | 9.00-16-14PR | 9.00-16-14PR | |
Rear | 9.00-16-14PR | 9.00-16-14PR | |
Platform: (LxBxH) | mm | 5070x1240x1070 | 5070x1240x1070 |
Fork: (LxBxH) | mm | 1200x150x60 | 1200x150x60 |
Overall Dimensions: (LxBxH) | mm | 5170x2150x2820 | 5170x2150x2820 |
Deadweight | kg | 9500 | 9500 |
Electric Forklift Truck
Operating Quality | kg | 4400 |
---|---|---|
Rated Lifting Capacity | kg | 2500 |
Lifting Height | mm | 3000 |
Fully-loaded Lifting Speed | mm/s | 230 |
Travel Speed (Full Load/Empty) | km/h | 11/13.5 |
Gradeability (Full Load) | % | 12 |
Tilt Angle of Mast | ° | 6°/12° |
Turning Radius | mm | 2300 |
Full Length | mm | 3565 |
Full Width | mm | 1150 |
Full Height | mm | 2180 |
Minimum Ground Clearance | mm | 110 |
Wheelbase | mm | 1600 |
Track (Front/Rear) | mm | 970/980 |
Tyre | Front | 7.00-12-12PR |
Rear | 18X7-8-14PR |
20T
Product Model | Unit | CPCD200 | |
---|---|---|---|
Rated Lifting Capacity | kg | 20000 | |
Weight | kg | 26000 | |
Minimum Turning Radius | mm | 5800 | |
Overall Dimensions:(LxBxH ) | mm | 7640x3020x3600 | |
Travel Speed: Forward 1-2/Backward | km/h | 12-25/12 | |
Maximum Gradeability | % | 15 | |
Load Center Distance | mm | 900 | |
Tilt Angle of Mast | ° | 6°/12° | |
Fully-loaded Lifting Speed | mm/s | 180 | |
Maximum Lifting Height | mm | 3300 | |
Minimum Ground Clearance | mm | 250 | |
Track (Front/rear) | mm | 2200/2390 | |
Wheelbase | mm | 4000 | |
Tyre | Front | 4-14.00-24-24PR | |
Rear | 2-14.00-24-24PR | ||
Engine | Model | D6114ZG30B | |
Rated Power/ Speed | kw/r • p • m | 132/2000 | |
Max. Torque Speed | N • m/r • p • m | 810/1600 |
14T-16T
Product Model | Unit | CPCD140 | CPCD150 | CPCD160 | |
---|---|---|---|---|---|
Rated Lifting Capacity | Kg | 14000 | 15000 | 16000 | |
Weight | kg | 20000 | 20000 | 20000 | |
Fork: L x W x H | mm | 1800x180x90 | 1800x180x90 | 1800x180x90 | |
Minimum Turning Radius | mm | 5800 | 5800 | 5800 | |
Overall Dimensions(LxBxH ) | mm | 7360x2750x3600 | 7360x2750x3600 | 7360x2750x3600 | |
Travel Speed: Forward 1-2/Backward | km/h | 10-25/12.5 | 10-25/12.5 | 10-25/12.5 | |
Gradeability | % | 20 | 20 | 20 | |
Load Center Distance | mm | 600 | 600 | 600 | |
Tilt Angle of Mast (F/B) | ° | 6° /12° | 6° /12° | 6° /12° | |
Fully-loaded Lifting Speed | mm/s | 300 | 300 | 300 | |
Maximum Lifting Height | mm | 3500 | 3500 | 3500 | |
Free Lifting Height | mm | 180 | 180 | 180 | |
Minimum Ground Clearance | mm | 250 | 250 | 250 | |
Track (Front/rear) | mm | 2060/2330 | 2060/2330 | 2060/2330 | |
Wheelbase | mm | 3800 | 3800 | 3800 | |
Tyre | Front | 4-12.00-24/18PR | 4-12.00-24/18PR | 4-12.00-24/18PR | |
Rear | 2-12.00-20/16PR | 2-12.00-20/16PR | 2-12.00-20/16PR | ||
Engine | Model | D6114ZG9B | D6114ZG9B | D6114ZG9B | |
Rated Powe Speed | kw/r • p • m | 125/2200 | 125/2200 | 125/2200 | |
Max. Torque Speed | N • m/r • p • m | 650/1400 | 650/1400 | 650/1400 | |
Fuel Consumption Rate | g/kw.h | 228 | 228 | 228 |
10T-12T
Product Model | Unit | CPCD100B | CPCD 100B-J | CPCD120B | CPCD120B-J | |
---|---|---|---|---|---|---|
Rated Lifting Capacity | kg | 10000 | 10000 | 12000 | 12000 | |
Deadweight | kg | 15000 | 15000 | 15000 | 15000 | |
Fork: L x W x H | mm | 1600x180x80 | 1600x180x80 | 1600x180x80 | 1600x180x80 | |
Minimum Turning Radius | mm | 4350 | 4350 | 4350 | 4350 | |
Overall Dimensions(LxBxH) | mm | 6090x2280x3050 | 6090x2280x3050 | 6090x2280x3050 | 6090x2280x3050 | |
Maximum Travel Speed | km/h | 26 | 26 | 26 | 26 | |
Gradeability (full load/empty) | % | 15/20 | 15/18 | 15/20 | 15/18 | |
Load Center Distance | mm | 600 | 600 | 600 | 600 | |
Tilt Angle of Mast (F/B) | ° | 6° /12° | 6° /12° | 6° /12° | 6° /12° | |
Fully-loaded Lifting Speed | mm/s | 220 | 220 | 220 | 220 | |
Max. Lifting Height | mm | 3000 | 3000 | 3000 | 3000 | |
Free Lifting Height | mm | 200 | 200 | 200 | 200 | |
Minimum Ground Clearance | mm | 235 | 235 | 235 | 235 | |
Track (Front/rear) | mm | 1680/1800 | 1680/1800 | 1680/1800 | 1680/1800 | |
Wheelbase | mm | 2890 | 2890 | 2890 | 2890 | |
Tyre | Front | 4X10.00-20-16PR | 4X10.00-20-16PR | 4X10.00-20-16PR | 4X10.00-20-16PR | |
Rear | 2X10.00-20- 16PR | 2X10.00-20-16PR | 2X10.00-20-16PR | 2X10.00-20-16PR | ||
Engine | Model | LR6108G59 | 6BG1 Isuzu 6BG1 | LR6108G59 | 6BG1 Isuzu 6BG1 | |
Rated Power/ Speed | kw/r • p • m | 92/2200 | 84.6/2200 | 92/2200 | 84.6/2200 | |
Max. Torque/ Speed | N • m/r • p • m | 460/1400-1600 | 410.9/1400-1600 | 460/1400-1600 | 410.9/1400-1600 | |
Fuel Consumption Rate | g/kw.h | 242 | 230 | 242 | 230 |
8T
Product Model | Unit | CPCD80-2 | CPCD80-2J | |
---|---|---|---|---|
Rated Lifting Capacity | kg | 8000 | 8000 | |
Deadweight | kg | 10800 | 10800 | |
Fork: L x W x H | mm | 1600x180x80 | 1600x180x80 | |
Minimum Turning Radius | mm | 4200 | 4200 | |
Overall Dimensions (LxBxH) | mm | 5757x2066x2715 | 5757x2066x2715 | |
Maximum Travel Speed | km/h | 26 | 26 | |
Gradeability | % | 20 | 20 | |
Load Center Distance | mm | 600 | 600 | |
Tilt Angle of Mast(F/B) | ° | 6° /12° | 6° /12° | |
Distance from the center line of the Front axle to the fork surface | mm | 747 | 747 | |
Lifting Height | mm | 3000 | 3000 | |
Free Lifting Height | mm | 160 | 160 | |
Minimum Ground Clearance | mm | 180 | 180 | |
Track (Front/rear) | mm | 1494/1600 | 1494/1600 | |
Wheelbase | mm | 2700 | 2700 | |
Tyre | Front | 4X8.25-20-14PR | 4X8.25-20-14PR | |
Rear | 2X9.00-16-14PR | 2X9.00-16-14PR | ||
Engine | Model | LR6108G6B | 6BG1 | |
Rated Power/ Speed | kw/r • p • m | 81/2300 | 84.6/2200 | |
Max. Torque/ Speed | N • m/r • p • m | 393/1600-1800 | 410.9/1400-1600 | |
Fuel Consumption Rate | G/kw.h | 242 | 230 |
6T 7T BT
Product Model | Unit | CPCD60BT | CPCD70BT (LIBA) | CPCD70BT II (LIBA II) | |
---|---|---|---|---|---|
Rated Lifting Capacity | kg | 6000 | 7000 | 7000 | |
Weight | kg | 9300 | 10000 | 10000 | |
Fork: L x W x H | mm | 1200x150x60 | 1400x150x70 | ||
Turning Radius | mm | 3400 | 3600 | 3600 | |
Overall Dimensions: (LxBxH) | mm | 4720x2066x2599 | 5193x2018x2686 | 5193x2018x2686 | |
Maximum Travel Speed | km/h | 21.5 | 26 | 26 | |
Gradeability (full load) | % | 20 | 20 | 20 | |
Load Center Distance | mm | 600 | 600 | 600 | |
Tilt Angle of Mast (F/B) | ° | 6°/12° | 7° /13° | 7° /13° | |
Height of Overhead Guard | mm | 2504 | 2504 | 2504 | |
Maximum Lifting Height | mm | 3000 | 3000 | 3000 | |
Free Lifting Height | mm | 170 | 170 | 170 | |
Minimum Ground Clearance | mm | 245 | 166 | 166 | |
Track (Front/Rear) | mm | 1530/1500 | 1494/1500 | 1494/1500 | |
Wheelbase | mm | 2280 | 2500 | 2500 | |
Tyre | Front | 4x8.25-20-14PR | 4x8.25-20-14PR | 4x8.25-20-14PR | |
Rear | 2x8.25-15-14PR | 2x8.25-15-14PR | 2x8.25-15-14PR | ||
Engine | Model | 6102BG4 | LR6105G69 | YC J8401 | |
Rated Power/Speed | kw/r • p • m | 72.8/2200 | 80/2200 | 85/2200 | |
Max. Torque/Speed | N • m/r • p • m | 353/1600-1800 | 400/1500-1600 | 425/1400-1600 |
5T-6T
Product Model | Unit | CPCD50A-2 | CPCD60A-2 | |
---|---|---|---|---|
Rated Lifting Capacity | kg | 5000 | 6000 | |
Deadweight | kg | 8300 | 8600 | |
L x Wx H | mm | 1200x150x60 | 1200x150x60 | |
Turning Radius | mm | 3400 | 3400 | |
Overall Dimensions (LxBxH) | mm | 4620x1990x2495 | 4620x1990x2495 | |
Maximum Travel Speed | km/h | 26 | 26 | |
Gradeability | % | 20 | 20 | |
Load Center Distance | mm | 600 | 600 | |
Tilt Angle of Mast (F/B) | ° | 6°/12° | 6°/12° | |
Height of Overhead Guard | mm | 2230 | 2230 | |
Maximum Lifting Height | mm | 3000 | 3000 | |
Free Lifting Height | mm | 160 | 160 | |
Minimum Ground Clearance | mm | 160 | 160 | |
Track (Front/rear) | mm | 1485/1500 | 1485/1500 | |
Wheelbase | mm | 2200 | 2200 | |
Tyre | Front | 4x8.25-15-14PR | 4x8.25-15-14PR | |
Rear | 2x8.25-15-14PR | 2x8.25-15-14PR | ||
Engine | Model | LR4108G8 | LR4108G8 | |
Rated Power/Speed | kw/r • p • m | 64/2400 | 64/2400 | |
Max. Torque/Speed | N • m/r • p • m | 292/1500-1600 | 292/1500-1600 | |
Fuel Consumption Rate | g/kw.h | 242 | 242 |
2T-3T (E series)
Model |
|
CPCD20 |
CPCD25 |
CPCD30 |
CPCD35 |
|
Name |
|
XG520-DT5 |
XG525-DT5 |
XG530-DT5 |
XG535-DT5 |
|
Power type |
|
Diesel |
||||
Rated load |
kg |
2000 |
2500 |
3000 |
3500 |
|
Load centers distance |
mm |
500 |
||||
Lifting height |
mm |
3000 |
||||
Free lifting height |
mm |
140 |
140 |
145 |
150 |
|
Tilt Angle of Mast |
α/β |
6/12 |
||||
Total length (L) |
mm |
3650 |
3650 |
3820 |
3860 |
|
Total width (W) |
mm |
1155 |
1155 |
1220 |
1220 |
|
Fork (L×W×H) |
mm |
1070x122x40 |
1070x122x40 |
1070x125x45 |
1070x125x50 |
|
Load center distance (F/R) |
mm |
475/485 |
475/485 |
475/515 |
480/555 |
|
Wheel base (L1) |
mm |
1650 |
1650 |
1760 |
1760 |
|
Min. Turning radius (R) |
mm |
2200 |
2260 |
2400 |
2420 |
|
Min。 ground clearance (H3) |
mm |
110 |
110 |
140 |
140 |
|
Max. Running speed |
km/h |
20 |
||||
Lifting speed (full load) |
mm/s |
530 |
530 |
450 |
360 |
|
Max. Traction force |
kN |
15 |
||||
Max. Gradeability |
0 |
20 |
||||
Deadweight |
kg |
3440 |
3765 |
4270 |
4550 |
|
Tires |
Front wheel |
|
7.00-12-12PR |
28x9-15-14PR |
||
Rear wheel |
|
6.00-9-10PR |
6.50-10-1OPR |
|||
Wheel track (F/R) (W1/W2) |
mm |
965/980 |
1000/980 |
|||
Engine |
Brand |
|
Xinchang |
|||
Model |
|
C490BPG |
||||
Rated power / speed |
kW/r.p.m |
40/2650 |
||||
Max. torque / speed |
N.w/r.p.m |
160/1800-2000 |
XG3220C
Model \ Technical Parameter | XG3220C |
---|---|
Engine | |
Manufacturer | Dongfeng Cummins |
Model | 6CTA8.3-C240 |
Rated Power (kw/hp) | 179 /240 |
Rated Speed (rpm) | 2200 |
Blade | |
Height× String Height (mm) | 4270×610 |
Reversing Angle (°) | 360 |
Max. Blade Angle (°) | 90 |
Cutting Depth (mm) | 500 |
Drive Type | Motor+ worm case |
Transmission | |
Type | Electrohydraulicgearshift |
Number of Gears | F6/R3 |
Forward Speed (Km/h) | 5.0,8.7,11.4, 19.3,23.9,39.8 |
Reverse Speed (Km/h) | 5.0,11.4,23.9 |
Drive Type | Rear-axle drive |
Max. Traction Force (KN) | ≤92 |
Tyre SPEC | 17.5-25 |
Front Axle | |
Wheel Lean Angle: (°) | ±17 |
Steering Angle: (°) | ±45 |
Oscillation Angle: (°) | ±15 |
Ground Clearance: (mm) | 450 |
Articulation Angle (°) | 25, right and left |
Type of Service Brake | Hydraulic disc brake |
Type of Parking Brake | Hand-operatedshoe-type brake |
Total Weight (Kg) | 17000 |
Basic Overall Dimensions (mm) (L×W×H) | 9450×2595×3400 |
Full Overall Dimensions (mm) (L×W×H) | 10840×2750×3400 |
XG3200C
Model \ Technical Parameter | XG3200C |
---|---|
Engine | |
Manufacturer | Dongfeng Cummins |
Model | 6CTAA8.3-C215 |
Rated Power (kw/hp) | 160 /215 |
Rated Speed (rpm) | 2200 |
Blade | |
Height× String Height (mm) | 3965×610 |
Reversing Angle (°) | 360 |
Max. Blade Angle (°) | 90 |
Cutting Depth (mm) | 500 |
Drive Type | Motor + worm case |
Transmission | |
Type | |
Number of Gears | F6/R3 |
Forward Speed (Km/h) | 5.1,8.7,11.4, 19.5,24.1,40.1 |
Reverse Speed (Km/h) | 5.1,11.4,24.1 |
Drive Type | Rear-axle drive |
Max. Traction Force (KN) | ≤88 |
Tyre SPEC | 17.5-25 |
Front Axle | |
Wheel Lean Angle: (°) | ±17 |
Steering Angle: (°) | ±45 |
Oscillation Angle: (°) | ±15 |
Ground Clearance: (mm) | 430 |
Articulation Angle (°) | 25, right and left |
Type of Service Brake | Hydraulic disc brake |
Type of Parking Brake | Hand-operatedshoe-type brake |
Total Weight (Kg) | 16200 |
Basic Overall Dimensions (mm) (L×W×H) | 9305×2595×3400 |
Full Overall Dimensions (mm) (L×W×H) | 10840×2750×3400 |
XG3180C
Model \ Technical Parameter | XG3180C |
---|---|
Engine | |
Manufacturer | Dongfeng Cummins |
Model | 6BTA5.9-C180 |
Rated Power (kw/hp) | 132 /180 |
Rated Speed (rpm) | 2200 |
Blade | |
Height× String Height (mm) | 3965×610 |
Reversing Angle (°) | 360 |
Max. Blade Angle (°) | 90 |
Cutting Depth (mm) | 500 |
Drive Type | Motor + worm case |
Transmission | |
Type | |
Number of Gears | F6/R3 |
Forward Speed (Km/h) | 5.0,8.7,11.4, 19.3,23.6,37 |
Reverse Speed (Km/h) | 5.0,11.4,23.6 |
Drive Type | Rear-axle drive |
Max. Traction Force (KN) | ≤84 |
Tyre SPEC | 17.5-25 |
Front Axle | |
Wheel Lean Angle: (°) | ±17 |
Steering Angle: (°) | ±45 |
Oscillation Angle: (°) | ±15 |
Ground Clearance: (mm) | 430 |
Articulation Angle (°) | 25, right and left |
Type of Service Brake | Hydraulic disc brake |
Type of Parking Brake | Hand-operatedshoe-type brake |
Total Weight (Kg) | 15500 |
Basic Overall Dimensions (mm) (L×W×H) | 8890×2595×3400 |
Full Overall Dimensions (mm) (L×W×H) | 10530×2750×3400 |
XG3165C
Model \ Technical Parameter | XG3165C |
---|---|
Engine | |
Manufacturer | Dongfeng Cummins Corporation |
Model | 6BTAA5.9-C180 |
Rated Power (kw/hp) | 132/180 |
Rated Speed (rpm) | 2200 |
Blade | |
Height× String Height (mm) | 3660×610 |
Reversing Angle (°) | 360 |
Max. Blade Angle (°) | 90 |
Cutting Depth (mm) | 500 |
Drive Type | Motor + worm case |
Transmission | |
Type | Electro hydraulic gearshift |
Number of Gears | F6/R3 |
Forward Speed (Km/h) | 4.9,7.6,12.3, 18.5,26.8,37.1 |
Reverse Speed (Km/h) | 4.9,12.3,26.8 |
Drive Type | Rear-axle drive |
Max. Traction Force (KN) | ≤80 |
Tyre SPEC | 17.5-25 |
Front Axle | |
Wheel Lean Angle: (°) | ±17 |
Steering Angle: (°) | ±45 |
Oscillation Angle: (°) | ±15 |
Ground Clearance: (mm) | 430 |
Articulation Angle (°) | 25, right and left |
Type of Service Brake | Hydraulic disc brake |
Type of Parking Brake | Hand-operated shoe-type brake |
Total Weight (Kg) | 14800 |
Basic Overall Dimensions (mm) (L×W×H) | 8880×2595×3390 |
Full Overall Dimensions (mm) (L×W×H) | 10330×2750×3400 |
XG6142M
Description | Unit | Specifications | |
---|---|---|---|
XG6142M | |||
Operating Weight | kg | 14000 | |
Static Linear Load of Drum | N/cm | 322 | |
Vibration Frequency | Hz | 30 | |
Theoretical Amplitude(High/Low) | mm | 1.7/0.82 | |
Centrifugal Force(High/Low) | KN | 270/135 | |
Drum Weight | kg | 7000 | |
Min. Turning Radius | mm | 6500 | |
Max. Gradeability | % | 25% | |
Drum (D×W) | mm | φ1550×2130 | |
Overall Dimensions (L×W×H) | mm | 6025×2375×3170 | |
Travel Speed | Gear I (F/R) | km/h | 2.5 |
Gear II (F/R) | km/h | 4.8 | |
Gear III (F) | km/h | 9.8 | |
Engine | Model | Yuchai YC6B150Z-T11 | |
Rated Power | kW | 110 | |
Rated Speed | r/min | 2100 |
XG6122H
Description | Unit | XG6122H | |
---|---|---|---|
Operating Weight | kg | 12100 | |
Static Linear Load of Drum | N/cm | 324 | |
Vibration Frequency | Hz | 30 | |
Theoretical Amplitude (High/Low) | mm | 1.7/0.85 | |
Centrifugal Force (High/Low) | kN | 256/155 | |
Drum Weight | kg | 7000 | |
Min. Turning Radius | mm | 6300 | |
Max. Gradeability | % | 45 | |
Drum (D×W) | mm | φ1550×2130 | |
Min. Ground Clearance | mm | 295 | |
Overall Dimensions (L×W×H) | mm | 5702×2270×3235 | |
Travel Speed | Gear Ⅰ | km/h | 0 - 6.3 |
Gear Ⅱ | km/h | 0 - 9.5 | |
Engine | Model | Cummins QSB4.5 | |
Rated Power | kW | 97 | |
Rated Speed | r/min | 2300 |
XG6261
Description | Unit | XG6261 | |
---|---|---|---|
Operating Weight | kg | 25500 | |
Static Linear Load of Drum | N/cm | 782 | |
Vibration Frequency (High/Low) | Hz | 28/30 | |
Theoretical Amplitude (High/Low) | mm | 2.0/1.0 | |
Centrifugal Force (High/Low) | KN | 420/280 | |
Drum Weight | kg | 17000 | |
Min. Turning Radius | mm | 6600 | |
Max. Gradeability | % | 45 | |
Drum (D×W) | mm | φ1600×2300 | |
Overall Dimensions (L×W×H) | mm | 6190×2475×3247 | |
Travel Speed | Gear Ⅰ | km/h | 0 – 4.0 |
Gear Ⅱ | km/h | 0 – 5.4 | |
Gear Ⅲ | km/h | 0 – 6.0 | |
Gear Ⅳ | km/h | 0 – 10 | |
Engine | Model | Weichai WD615 | |
Rated Power | kW | 162 | |
Rated Speed | r/min | 2200 |
XG6201
Description | Unit | XG6201 | |
---|---|---|---|
Operating Weight | kg | 20000 | |
Static Linear Load of Drum | N/cm | 552 | |
Vibration Frequency | Hz | 28 | |
Theoretical Amplitude | mm | 1.8/0.9 | |
Centrifugal Force | kN | 354/211 | |
Drum Weight | kg | 12000 | |
Min. Turning Radius | mm | ||
Max. Gradeability | % | ||
Drum (D×W) | mm | ||
Min. Ground Clearance | mm | ||
Overall Dimensions (L×W×H) | mm | ||
Travel speed | Gear I | km/h | |
Gear II | km/h | ||
Gear III | km/h | ||
Engine | Model | ||
Rated Power | kW | ||
Rated Speed | r/min |
XG6181
Description | Unit | XG6181 | |
---|---|---|---|
Operating Weight | kg | 18000 | |
Static Linear Load of Drum | N/cm | 497 | |
Vibration Frequency | Hz | 28 | |
Theoretical Amplitude | mm | 1.8/0.9 | |
Centrifugal Force | kN | 330/197 | |
Drum Weight | kg | 10800 | |
Min. Turning Radius | mm | 6500 | |
Max. Gradeability | % | 35 | |
Drum (D×W) | mm | φ1550×2130 | |
Min. Ground Clearance | mm | 355 | |
Overall Dimensions (L×W×H) | mm | 6115×2375×3185 | |
Travel speed | Gear I | km/h | 0-4.5 |
Gear II | km/h | 0-6.9 | |
Gear III | km/h | 0-10.3 | |
Engine | Model | Shangchai D6114 | |
Rated Power | kW | 140 | |
Rated Speed | r/min | 2200 |
XG6141
Description | Unit | XG6141 | |
---|---|---|---|
Operating Weight | kg | 14000 | |
Static Linear Load of Drum | N/cm | 385 | |
Vibration Frequency | Hz | 30 | |
Theoretical Amplitude | mm | 1.8/0.9 | |
Centrifugal Force | kN | 260/130 | |
Drum Weight | kg | 8200 | |
Min. Turning Radius | mm | 6300 | |
Max. Gradeability | % | 45 | |
Drum (D×W) | mm | ||
Min. Ground Clearance | mm | ||
Overall Dimensions (L×W×H) | mm | ||
Travel speed | Gear I | km/h | 0-4.3 |
Gear II | km/h | 0-6.4 | |
Gear III | km/h | 0-9.2 | |
Engine | Model | ||
Rated Power | kW | ||
Rated Speed | r/min |
XG6121
Description | Unit | XG6121 | |
---|---|---|---|
Operating Weight | kg | 12100 | |
Static Linear Load of Drum | N/cm | 333 | |
Vibration Frequency | Hz | 30 | |
Theoretical Amplitude | mm | 1.7/0.85 | |
Centrifugal Force | kN | 247/127 | |
Drum Weight | kg | 7100 | |
Drum Linear Static Load | N/cm | 333 | |
Min. Turning Radius | mm | 6300 | |
Max. Gradeability | % | 50 | |
Drum (D×W) | mm | φ1550×2130 | |
Min. Ground Clearance | mm | 295 | |
Overall Dimensions (L×W×H) | mm | ||
Travel speed | Gear I | km/h | 0-4.3 |
Gear II | km/h | 0-6.4 | |
Gear III | km/h | 0-9.2 | |
Engine | Model | Cummins 6BT5.9 | |
Rated Power | kW | 112 | |
Rated Speed | r/min | 2400 |
XG6101
Description | Unit | XG6101 | |
---|---|---|---|
Operating Weight | kg | 10600 | |
Static Linear Load of Drum | N/cm | 282 | |
Vibration Frequency | Hz | 30 | |
Theoretical Amplitude | mm | 1.7/0.85 | |
Centrifugal Force | kN | 225/112 | |
Drum Weight | kg | 6000 | |
Min. Turning Radius | mm | 6300 | |
Max. Gradeability | % | 50 | |
Drum (D×W) | mm | φ1540×2130 | |
Min. Ground Clearance | mm | 350 | |
Overall Dimensions (L×W×H) | mm | 5688×2270×3200 | |
Travel speed | Gear I | km/h | 0-4.9 |
Gear II | km/h | 0-7.3 | |
Gear III | km/h | 0-10.4 | |
Engine | Model | Cummins 4BTA3.9 | |
Rated Power | kW | 97 | |
Rated Speed | r/min | 2500 |
XG825EL
Standard bucket capacity | 1.2 m3 |
Operating weight | 25.5 T |
Engine model | Isuzu CC-6BG1TRA |
Rated power/rated rpm (net) | 132 kw/2150 rpm |
Swing speed | 11.5 min-1 |
Travel speed (H/L) | 5.6/3.2 km/h |
Ground specific pressure | 48 kpa |
Gradeability | 35° |
Digging force (stick/bucket) | 118/170kN |
A | Full length during transportation | 10140mm |
B | Full width during transportation | 3190mm |
C | Full height during transportation | 3100mm |
D | Height of the operator cab | 3035mm |
E | Full length of the track in contact with the ground | 4640mm |
F | Track gauge | 2590mm |
G | Wheelbase | 3840 |
H | Track shoe width | 600mm |
I | Minimum swing radius of the front part | 3935mm |
J | Swing radius of the rear part | 3040mm |
A’ | Maximum digging height | 9680mm |
B’ | Maximum unloading height | 6785mm |
C’ | Maximum digging depth | 6940mm |
D’ | Maximum vertical digging depth | 6100mm |
E’ | Minimum swing radius | 3935mm |
XG822EL
Standard bucket capacity | 0.91 m3 |
Operating weight | 21.5T |
Engine model | Isuzu CC-6BG1TRP |
Rated power/rated rpm (net) | 125 km/2100 rpm |
Swing speed | 12.5 min-1 |
Travel speed (H/L) | 5.0/3.5 km/h |
Ground specific pressure | 43kpa |
Gradeability | 35° |
Digging force (stick/bucket) | 99/137kN |
A | Full length during transportation | 9500mm |
B | Full width during transportation | 2990mm |
C | Full height during transportation | 2920mm |
D | Height of the operator cab | 2920mm |
E | Full length of the track in contact with the ground | 4460mm |
F | Track gauge | 2390mm |
G | Wheelbase | 3660mm |
H | Track shoe width | 600mm |
I | Minimum swing radius of the front part | 3540mm |
J | Swing radius of the rear part | 2830mm |
H | Link Length | 5700mm |
I | Arm Length | 2400mm |
A’ | Maximum digging height | 9600mm |
B’ | Maximum unloading height | 6780mm |
C’ | Maximum digging depth | 6670mm |
D’ | Maximum vertical digging depth | 6050mm |
E’ | Minimum swing radius | 3540mm |
XG818
Model | XG818 |
---|---|
Specifications: | |
Bucket capacity | 0.8m³ |
Operate weight: | 18.0T |
Engine Model | Yuchai6B160Z |
Engine Power | 110kW/1100rpm |
Travel Speed | 2.4/4.5 km/h |
System Pressure | 32 Mpa |
Gradeability | >30° |
Exterior Dimensions | |
Full length during transportation | 8540mm |
Full width during transportation | 2720mm |
Full height during transportation | 2920mm |
Operating Range | |
Max. Digging Radius | 8985mm |
Max. Digging Height | 9430mm |
Max. Dumping Height | 6960mm |
Max. Digging Depth | 5975mm |
Min.Swing Radius | 2725mm |
XG815EL
Standard bucket capacity | 0.6M3 |
Operating weight | 13.9 T |
Engine model | Isuzu BB-4BG1TRP |
Rated power/rated rpm (net) | 70KW/2000 rpm |
Swing speed | 11.9 min-1 |
Travel speed (H/L) | 5.0/3.2 km/h |
Ground specific pressure | 40kpa |
Gradeability | 35° |
Digging force (stick/bucket) | 69/95 kN |
A | Full length during transportation | 7740mm |
B | Full width during transportation | 2500mm |
C | Full height during transportation | 2810mm |
D | Height of the operator cab | 2730mm |
E | Full length of the track in contact with the ground | 3838mm |
F | Track gauge | 1990mm |
G | Wheelbase | 3100mm |
H | Track shoe width | 500mm |
I | Minimum swing radius of the front part | 2520mm |
J | Swing radius of the rear part | 2280mm |
A’ | Maximum digging height | 8480mm |
B’ | Maximum unloading height | 6060mm |
C’ | Maximum digging depth | 5520mm |
D’ | Maximum vertical digging depth | 4940mm |
E’ | Minimum swing radius | 2520mm |
XG808
Specifications of XG808 | |
---|---|
Operating weight | 7800 kg |
Bucket capacity | 0.32 m³ |
Engine model | ISUZU 4JG1TPC |
Engine output | 55 Kw/2150 rpm |
Travel speed(High/Low) | 5.1/3.2 km/h |
Grade ability | 35° |
Platform swing speed | 12 rpm |
Max digging force | 58 KN |
Overall dimension | |
Transport length | 6100 mm |
Overall length of undercarriage | 2765 mm |
wheelbase | 2140 mm |
Overall width of upper structure | 2220 mm |
Undercarriage width | 2200 mm |
Track shoe width | 450 mm |
Overall height of cab | 2600 mm |
Working ranges | |
Max digging depth | 4160 mm |
Max vertical digging depth | 3550 mm |
Max digging height | 7160 mm |
Max dumping height | 5080 mm |
Max digging radius | 6325 mm |
Rear swing radius | 1750 mm |
* Pictures are for reference only. All specifications and information are subject to change without prior notice. |
XG806
Specifications of XG806 | |
---|---|
Operating weight | 5850 kg |
Bucket capacity | 0.22 m³ |
Engine model | YANMAR 4TNV94L |
Engine output | 35.5 Kw/2200 rpm |
Max. digging force | 37.7 KN |
Travel speed(High/Low) | 4/2 km/h |
Grade ability | 70% (35°) |
Platform swing speed | 8.5 rpm |
Overall dimensions | |
Transport length | 5900 mm |
Overall length of undercarriage | 2530 mm |
Wheelbase | 1990 mm |
Undercarriage width | 1920 mm |
Track shoe width | 400 mm |
Overall height of cab | 2550 mm |
Boom transport height | 2630 mm |
Minimum ground clearance | 380 mm |
Blade(width×height) | 1920×350 mm |
Working ranges | |
Max digging depth | 3820 mm |
Max vertical digging depth | 3200 mm |
Max digging height | 5750 mm |
Max dumping height | 4100 mm |
Max digging radius | 6100 mm |
Rear swing radius | 1650 mm |
Optional equipment | |
Hammer |
XG956H
Model | XG956H | |
---|---|---|
Overall length(mm) | 8130 | |
Overall height(mm) | 3450 | |
Overall width(mm) | 2880 | |
Wheel base(mm) | 3200 | |
Ground clearance(mm) | 460 | |
Tread(mm) | 2240 | |
Bucket Width (mm) | 3000 | |
Turn radius(mm) | 6195 | |
Min.Turn radius outside of bucket (mm) | 7090 | |
4240 | ||
Max. Dumping Height(mm) | 3355 | |
Dumping Reach(mm) | 1160 | |
Digging depth(mm) | 60 | |
47 | ||
Engine model | SC9D220G2 | |
Rated power (kw) | 162 | |
Fuel comsumption per hour(g/kw.h ) | 215 | |
Rated speed (r/min) | 2200 | |
Max torque(N.m) | 920 | |
Operating Weight (Tonnes) | 17.4 | |
Rated Load(Tonnes) | 5 | |
Bucket capacity (m³) | 2.7 | |
Lifting time/Lifting, dumping and lowering(s) | 6/11 | |
Max Breakout force(KN) | 170 | |
Max. turning angle(°) | ±35° | |
Fuel tank(L) | 340 | |
Hydraulic tank(L) | 305 | |
Working pressure of steering hydraulic system(MPa) | 15 | |
Working pressure of load hydraulic system(MPa) | 18 | |
Travel speeds(km/h) | FORWARD 1ST | 0~11.5 |
FORWARD 2ND | 0~38 | |
FORWARD 3RD | — | |
FORWARD 4TH | — | |
REVERSE 1ST | 0~16 | |
REVERSE 2ND | — | |
REVERSE 3RD | — | |
Gear Box | XG | |
Axle | XG | |
Implement pump | 175 | |
Distibuting valve | SD32.2 | |
Steering Hydraulic system | BZZ6-1000 | |
Steering pump | 150 | |
Tyre size | 23.5-25-16PR | |
Air Conditioning/Anti-mist when idleing | √ | |
Heating | √ | |
Radio/Cassette | √ | |
Bucket and arm raiseing (limit height) Device | × | |
Hydraulic Operation system | × | |
Electricial Monitor and alarm system | √ | |
Seat Buckle | √ | |
Head lamp | √ | |
Reversing Alarm (Back vehicle) | √ |
XG955H
Model | XG955H | |
---|---|---|
Overall length(mm) | 7710 | |
Overall height(mm) | 3450 | |
Overall width(mm) | 2880 | |
Wheel base(mm) | 2880 | |
Ground clearance(mm) | 500 | |
Tread(mm) | 2240 | |
Bucket Width (mm) | 3000 | |
Turn radius(mm) | 5775 | |
Min.Turn radius outside of bucket (mm) | 6650 | |
4120 | ||
Max. Dumping Height(mm) | 3215 | |
Dumping Reach(mm) | 1185 | |
Digging depth(mm) | 80 | |
47 | ||
Engine model | SC11CB220G2B1/ 6CTA8.3-C215 |
|
Rated power (kw) | 162/160 | |
Fuel comsumption per hour(g/kw.h ) | 225/229 | |
Rated speed (r/min) | 2200 | |
Max torque(N.m) | 844/908 | |
Operating Weight (Tonnes) | 17.2 | |
Rated Load(Tonnes) | 5 | |
Bucket capacity (m³) | 2.7 | |
Lifting time/Lifting, dumping and lowering(s) | 5.8/11 | |
Max Breakout force(KN) | 170 | |
Max. turning angle(°) | ±35° | |
Fuel tank(L) | 220 | |
Hydraulic tank(L) | 295 | |
Working pressure of steering hydraulic system(MPa) | 15 | |
Working pressure of load hydraulic system(MPa) | 16 | |
Travel speeds(km/h) | FORWARD 1ST | 0~11.5 |
FORWARD 2ND | 0~38 | |
FORWARD 3RD | — | |
FORWARD 4TH | — | |
REVERSE 1ST | 0~16 | |
REVERSE 2ND | — | |
REVERSE 3RD | — | |
Gear Box | XG | |
Axle | XG | |
Implement pump | 209 | |
Distibuting valve | D32 | |
Steering Hydraulic system | BZZ6-1000 | |
Steering pump | 143 | |
Tyre size | 23.5-25-16PR | |
Air Conditioning/Anti-mist when idleing | √ | |
Heating | √ | |
Radio/Cassette | √ | |
Bucket and arm raiseing (limit height) Device | √ | |
Hydraulic Operation system | √ | |
Electricial Monitor and alarm system | √ | |
Seat Buckle | √ | |
Head lamp | √ | |
Reversing Alarm (Back vehicle) | √ |